FBE Coating Pipe hmanga siam a ni

Fusion Bonded Epoxy (FBE) coating hi high-performance external protection system a ni a, oil & gas, tui, leh infrastructure sector-a hman lar tak a ni. Single-layer powder coating anga hman a nih chuan FBE hi steel substrate nen direct-in a inzawm a, dense, continuous, leh corrosion-resistant barrier a siam a ni. Standalone protection atan emaw multi-layer system (3LPE/3LPP)-ah primer atan emaw hman a ni fo.

• ISO 21809-2 a ni– Factory-a pipeline phum emaw, tui hnuaia awm emaw atan FBE a hmang
• AWWA C213 a ni– Tui pipeline siamna tur FBE coating
• CSA Z245.20 a ni– Steel pipe atan fusion-bonded epoxy hman a ni
• NACE SP0102 a ni– Dilna leh enfiah dan tur

Pipe Range awm zat:A rilru a buai em em a, a rilru a hah em em bawk a. ERW, LSAW, SSAW

OD: 1000 a ni.1⁄2′′ – 48′′ (custom atanga 60′′ thleng)

Coating a thuk zawng: 1.1.250 – 500 μm

A hnathawhna Temperature: 1.1.-30℃atanga +95℃thleng

• Surface Inbuatsaihna– Sa 21⁄2 thlenga abrasive blasting, anchor profile 50–100 μm
• A lumna tur– Induction emaw furnace emaw 200–250℃thlenga tihlum
• Powder hmanga siam a ni– Epoxy powder hmanga electrostatic spray hmanga kah chhuah
• Fusion & Curing hmanga tihdam theih a ni– Epoxy chu a hmin a, a crosslink a, chemical hmangin steel nen a inzawm bawk
• Cooling & Inspection neih a ni bawk– Controlled cooling, thickness check, holiday test te pawh a awm bawk

• Adhesion & Bonding chakna danglam takFBE hi chemical hmangin steel substrate nen a fuse a, tenacious bond a siam a, chu chuan delamination a veng a, leilung stress emaw temperature inthlak danglamna hnuaiah pawh delamination a veng thei a ni.
• Cathodic humhalhna nena inmilCathodic disbondment resistance ropui tak, coating chhiatna hian corrosion a ti chak thei CP system-a hun rei tak-term performance a tichiang.
• Corrosion & Chemical laka inven theihnaDense epoxy matrix hian tui, oxygen, chloride leh chemical chi hrang hrang a do thei a, hei vang hian boruak thar leh saline-ah pawh a tha hle.
• Mechanical & Impact hmanga inven theihnaThin layer ni mahse FBE hian flexibility tha tak, abrasion resistance, leh transportation leh handling stress tuar thei te a lantir a ni.
• Environment & Safety lama hlawkna awm thei100% solid, solvent-free powder a ni a; VOC emission tlahniam; automated process thianghlim takah hman a ni a, sustainability-ah a pui hle.
• Versatility a niPipe dinglam, bend, fitting, leh field joint-ah te hman theih a ni; 3LPE/3LPP multilayer system tan standalone coating emaw primer emaw angin a thawk thei.

• A thuk zawng: 250–500 μm a ni
• Adhesion strength 9 MPa aia tam emaw, a tlukpui emaw
• Cathodic disbondment 12 mm radius aia tlem emaw, a tlukpui emaw (65℃, ni 28) .
• Tui lum do theihna: 65 degree-ah pawh a thawk tha hle
• Impact resistance: >3 J/mm a ni

• Oil & gas pipeline hla tak- hla tak tak
• Tui pipeline (municipal, industrial) hmanga siam chhuah a ni.
• Field joint, bend, fittings te pawh a awm bawk
• Steel pipeline phum leh tui hnuaia awm
• Primer base chu 3LPE/3LPP multilayer coating atan hman a ni

• Advanced Coating Facilities te pawh a awm bawkFully automated coating line electrostatic spray booths, induction heating, leh precision curing control te hian volume lian tak takah quality mumal tak a tichiang a ni.
• Quality Assurance khauh tak neih a niQA/QC program kimchang tak, thickness mapping, holiday detection, adhesion & peel test, hot water soak, leh ISO leh AWWA hrang hranga cathodic disbondment testing te pawh a tel.
• Standards zawm dan turISO 21809-2, AWWA C213, CSA Z245.20-a certified product zawng zawng, EN 10204 3.1/3.2 inspection certificate hmanga traceability kimchang nei.
• Khawvel pum huap Project lama tawnhriat neiOil & gas major, water utility project, leh offshore contractor te hnena supply track record proven, client specification khauh ber berte zawm.
• Supply & Delivery pawh a danglam theiPipe te tak te-diameter seamless pipe atanga LSAW lian-diameter thlengin Octal Pipe hian delivery rang tak, customized cutback preparation, leh international shipment atan robust packaging a tichiang a ni.
• Value-Services tihpun a niCoating thlan, technical consultation, leh 3LPE/3LPP system leh cathodic protection solution nena supply integration atana engineering support.

• Tihdan:Fusion Bonded Epoxy (layer pakhat-layer) hmanga siam a ni.
• Standard hrang hrang: 1.1.A rilru a hah lutuk chuan a rilru a buai em em a. ISO 21809-2, AWWA C213, CSA Z245.20
• Pipe Range awm zat:1⁄2′′ – 48′′ (dilna angin 60′′ thleng)
• Coating a thuk zawng: 1.1. 250 – 500 μm
• Operating Temp: 1000 a ni.-30℃atanga +95℃thleng
• Dilna hrang hrang:Oil & gas, tui pipeline, field joint, 3LPE/3LPP atana primer te a awm bawk

Certification pek chhuah a ni

 

CE Certificate neih a ni

ISO 9001 Certificate a ni

API Q1 Certificate a ni

ABS Certificate a awm bawk

AP-5L Certificate pek a ni

API-5CT Certificate pek a ni

 

hot tags .: fbe coating pipe, China fbe coating pipe siamtu, supplier, factory