Steel Plate hmanga siam a ni

Steel plate hi flat-rolled metal sheet mm 4 aia thuk a ni a, structural, lawng siamna, pressure vessel, pipeline, leh industrial application-ah te hman a ni. Material type a zirin-carbon steel, stainless steel, emaw alloy steel-steel plate hian boruak khirh tak tak atana mamawh chakna, chhe thei lo leh formability a pe chhuak thin. A danglamna tlangpui chu carbon steel sheet, stainless steel plate, lawng plate (marine propulsion & hulls atan), pipeline steel plate, leh wear-resistant brand plate Hardox 500 te a ni.

• Carbon Steel hmanga siam a ni: Alloy hniam emaw, steel mild emaw hman tlanglawn; plate thuk tak tak 5–200 mm+ a ni
• Stainless Steel hmanga siam a ni: A tlangpuiin 304, 316, 316L, duplex, etc.; surface finish duhthlan tur (pickled, #4, BA, etc.) te pawh a awm bawk.
• Lawng Plate a ni: AH36/DH36/EH36-high yield strength leh temperature hniam zawka toughness neiin marine impact & fatigue atan
• Plate ha rawh: Hardox 500 etc.-high hardness ( 500 HBW aia tam emaw a tlukpui emaw) leh wear & abrasion atan impact toughness a nei
• Coated / Treated Plate a ni: Galvanized steel plate (zinc coated), pre-painted, cut & edged plate te a awm a

• Melting & Casting tih a ni– EAF emaw BOS emaw hmanga steel siam; slab-a paih chhunzawm zel.
• Hot Rolling a ni– Slabs ~1,100-1,300℃thlenga tihlum , rough leh finish rolled to plate thickness.
• Normalizing, Quenching & Tempering tih te pawh a awm bawk– A bik takin ship plate leh wear plate te tan chuan chakna leh toughness neih theih nan.
• Cold Rolling / Plate a tifai thei– Cold rolled emaw plate stock emaw a tight zawk flatness leh surface finish mamawh tan.
• Surface Treatment hmanga enkawl a ni– Pickling, galvanizing, polishing, shot blasting tih te hi a awm lo.
• Cutting / Edge / Shearing tih hi a ni– Custom sizes: cuttings, nested plates, edge buatsaih dan te.
• Inspection & Testing neih a ni:

1. Mechanical test: tensile, yield, elongation, impact (Charpy V-notch) te hi a tha hle a, a chhuahna tur hmun leh a hmanna tur hmun chu a inthlau hle.
2. Wear plate te chu hardness test a ni
3. Ultrasonic thickness / chhiatna enfiah
4. Chemical composition finfiah a ni
5. Dimensional tolerances (a flatness, a thickness inang tlang) te chu .

• Yield & Tensile chakna a ni: AH36/DH36 ang chi ship plate te hian minimum yield ( 355 MPa aia tam emaw a tlukpui emaw) sang tak an nei a, tuipui structural load atan tensile strength tha tak an nei bawk.
• Temperature hniam takah pawh toughness a awm: EH36 hi khaw lum zawka siam a ni a; impact performance hi a pawimawh hle.
• Abrasion laka inven theihna: Wear plate (eg Hardox 500) te hian hardness sang tak leh toughness te chu an inzawm khawm a, chu chuan impact sang tak hnuaiah cracking a do thei a ni.
• Corrosion laka inven theihna: Stainless steel plate leh galvanized steel plate te hian rust lakah a venghim a; pipeline leh dahkhawmna atan hian steel resistant a ngai a ni.
• Formability / Weldability tih theihna: Carbon steel plate (A36) weld leh siam awlsam; lawng plate-ah hian welding, bending etc. atan thil tul bik a awm a.

• Lawng siam & Tuipui siamna: Hull, deck, bulkhead, tuipui kama rig platform siamnaah AH36 / EH36 / DH36 hmanga siam a ni.
• Pressure Vessel & Boiler te pawh a awm bawk: Internal pressure leh temperature pawimawhna hmuna ASTM A516 plate grade tling tak tak hman.
• Structural Steelwork hmanga hnathawh a ni: Building, kawngpui, frame-ASTM A36 plate hman lar tak.
• Wear Parts / Mining / Machine rit tak tak te: Hardox 500 leh a ang chi plate te chu loader, dump truck, chute, liners ah te dah a ni.
• Pipeline & Oil leh Gas hmanga siam a ni: Pipeline section lian tak tak diameter lian tak tak siamna tur pipeline steel plate, a chang chuan coatings nei, compressor station emaw trenchless crossing-a hman thin.
• Thil cheimawi / Architectural lam thil: Stainless steel plate, brush emaw polished emaw, cladding, facade atan.

• Thahrui leh Toughness sang tak a nei: Marine-grade leh pressure-vessel plate te hian phurrit nasa tak leh boruak khirh tak tak an tuar thin.
• A chhe thei lo: Wear plate hian abrasion hnuaiah component dam chhung a ti rei a; galvanized plate te hian corrosion a do thei.
• Size & Thickness lamah pawh hman theih a ni: From thin sheets (cold-rolled) to very thick plates (>200 mm) a ni a, structural rit tak tak emaw, wear emaw hmanna tur a ni.
• Weldability leh Fabrication te pawh a awm thei: Weld, bend, leh cut performance tha tak neih theihna tura duan grade tam tak.
• Customization hmanga siam a ni: Cuttings, pre-cut shapes, edge prep, coating emaw galvanizing emaw specification angin a awm thei.

Steel plate i sawi dawnin hetiang hian ngaihtuah tur a ni:

• Steel grade + standard (eg AH36, A36, A516) a ni a, a man pawh a to hle.
• A thickness, a zau zawng, a sei zawng, a flatness tolerance
• Surface finish & treatment (galvanized, stainless polish, wear plate, etc.) hmanga siam a ni.
• Edge chi hrang hrang (sheared, meialh cut, mill edge) 1.1.
• Test neih a ngai (mechanical, impact, hardness, UT) 1.1.
• Quantity leh delivery hun tur

• Steel Grade hrang hrang a awm: ASTM A36, A516, AH36 / DH36 / EH36, Hardox 500, stainless grade hrang hrang a awm bawk
• Standard hrang hrang: ASTM A36, ASTM A516, ASTM A131, EN / ISO tlukpui te hi a ni
• Thickness Range a ni: ~4 mm to A chi a zirin 200 mm aia tam emaw a tlukpui emaw
• Form hrang hrang a awm: Hot rolled, cold rolled, galvanized, wear plate, lawng plate te pawh a awm bawk
• Dilna hrang hrang: Tuipui, pressure vessel, structural, wear parts, pipeline steel plate te a awm bawk

Certification pek chhuah a ni

 

CE Certificate neih a ni

ISO 9001 Certificate a ni

API Q1 Certificate a ni

ABS Certificate a awm bawk

AP-5L Certificate pek a ni

API-5CT Certificate pek a ni

 

hot tags .: steel plate, China steel plate siamtu, supplier, factory